Papers
Plastic Pipes Conference Association # 2014 Chicago
DALE B. EDWARDS, ANAND R. SHAH, DONALD E. DUVALL
Differential scanning calorimetry (DSC) has been used to study the processing of PVC pipes. This work has been largely embodied in ISO 18373-1-2007, Rigid PVC Pipes –differential scanning calorimetry (DSC) method – Part 1: Measurement of the processing temperature and Part 2: Measurement of the enthalpy of fusion for crystallites. Part 2 of the ISO method allows for a measurement of the enthalpy for the lower of two endotherms (“A”) that are observed in a typical PVC DSC trace. A measurement procedure for obtaining the enthalpy for the second endotherm (“B”) is not included in the standard.
The processing temperature measurement (ISO 18373 Part 1) has been used on many different PVC pipes with great success, as well as the enthalpy measurement of the lower “A” endotherm. There have been several papers that describe a procedure for calculating the “percent gelation” of the PVC pipe material by using measurements of the enthalpy of both the lower and upper endotherms (“A” and “B”), even though measurement of the upper endotherm is not included in the ISO standard. Attempts have been made using these extensions of Part 2 and other published material to utilize these types of measurements in order to determine whether a particular PVC pipe was “processed correctly”. This paper investigates the precision of these measurements of both processing temperature and the percent gelation measurements in order to ascertain whether the measurements are indeed meaningful. The paper will report measurements of the processing temperature and “percent gelation”, based on DSC experiments from multiple PVC pipes and will include information with respect to the effect of sample location on the results.
Related papers
Author(s) : Saleem Shakir
Unplasticized formulations based on Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) resins offer technical solution to pressure piping systems that find extensive use in residential and industrial applications. Building upon the desirable properties of the vinyl monomer, the chlorine content of...
Author(s) : Sjoerd Jansma, René Hermkens
More than 20,000 km of rigid PVC (or PVC-U) pipes are currently in use for the distribution of natural gas in the Netherlands. In this decade, the majority of these pipes will reach their initially specified lifespan of 50 years. In the light of a possible replacement surge, it is increasingly important to identify...
Author(s) : Ernst van der Stok
For PE 100-RC, two tests are still under development for pipes: the point load test (PLT) and the accelerated notch pipe test (aNPT). The PLT was developed by a project group consisting of manufacturers and end users. The PLT determines the resistance to point loads as they can occur in practice. An earlier study...
Author(s) : S. Nestelberger, J. Cheng
The Point Load Test (PLT) [ 1, 2] was designed to simulate the SCG (slow crack growth) failure initiated by a rock pressing into the exterior wall of a polymer pipe. Today’s PE materials sustain long PLT testing times, due to its high SCG resistance design. Consequently, an accelerated “PLT+” with the support of...
Author(s) : Dr. Holger Brüning, Serge Hascoët, Yann Delanne, Didier Nozahic, Jawdat Mansour, José Santana
RTE operates, maintains and develops the French electricity network, including the High and very High Voltage cable lines. Their network is the largest in Europe and includes over 6400 km of underground HV links operated in 2018. The company is modernizing and developing its network by investing 1.5 billion euros per...
Author(s) : Antonio Rodolfo Jr., Vanderley M. John
Unplasticised (U-PVC) and modified (M-PVC) pipes used in irrigation and infrastructure applications, outside diameter 326 mm, were evaluated according to various fracture mechanics methodologies, including fracture toughness (stress intensity factor KC and energy release rate GC, both at fracture), essential work of...
Author(s) : Christian Schalich
Plastic pipes for infrastructure and building applications are precisely specified with regards to wall thickness and diameter. Pipe manufacturers use different measuring methods in order to ensure the required dimensional accuracy and maintain a constant high quality. This paper introduces a measuring system based on...
Author(s) : Mario Messiha, Britta Gerets, Jan Heimink, Andreas Frank, Florian Arbeiter, Gerald Pinter
A majority of field failure of viscoelastic plastic pipes can be attributed to slow crack growth (SCG) and has become crucial in terms of characterization of newly developed materials – particularly, if they are designed for pressurized pipe applications. In this study, investigations in terms of SCG resistances...
Author(s) : Thomas R. Kratochvilla, Patrick Grünbeck, Christoph Bruckner, Raimund Eremiasch, Harald Wilhelm, Mario Vukelja
In the last decades pipe dimensions of extruded PE pipes have reached new orders of size. Today, PE pipes with outer diameters of up to DN/OD 3500 mm are produced and used for pressure pipe applications like seawater intake/discharge, outfall, sewage and industrial process piping systems. To test the long-term...
Author(s) : Xinwen Yu, Aimin Xiang, Dongyu Fang, Peck Tze Kang, Jinghui Li
The Chinese PE water pipe market has developed significantly in recent years and particularly over the last 12 months. Against a background of water scarcity and growing urbanization, this evolving market has grown significantly in both size and quality awareness. On the back of past experiences, a fundamental...
Author(s) : Alireza Sahaf Amin, Dr. Gholamreza Pircheraghi
PE-Xa pipes used in the hot water supply are required for high mechanical strength and high creep resistance at high temperature. Because of the higher cross-link degree of PE-Xa pipes as compared with other crosslinked pipes methods , these pipes which are made by peroxide crosslinking have better performance in the...
Author(s) : Hua Ye, Sun Jin, Wei Ruoqi
As a safe, clean, low-carbon and reliable energy source, nuclear power, together with hydropower and coal power, constitutes the three pillars of the world's energy supply and play an important role in the world's energy structure.With the strong support of national policies, China's nuclear energy has entered a new...
Author(s) : Zhanjie Wang, Yan Zhao, Melody Guo, Yanju Fan, Wei Tang
In the past ten years, China's plastic pipe industry has maintained a steady growth and made great progress in the upgrading of industrial structure, technological innovation, and improvement of quality levels. However, at the same time, in the face of the complex changes in the current economic situation, especially...
Author(s) : Britta Gerets, Mirko Wenzel, Kurt Engelsing
The strain hardening test (SHT, ISO 18488 [1]) becomes increasingly important for the characterization of high-density polyethylene (HDPE) grades and pipes made thereof. With regard to small pipe diameters, a smaller test specimen than the one defined in ISO 18488 has been developed. SHT results were demonstrated to...
Author(s) : Hermann van Laak, Jan Heimink, Mario Messiha, Andreas Frank, Christoph Bruckner, Thomas Kratochvilla
For high pressure pipes above maximum operation pressure of 10 bar, this paper emphasizes PA-U12 as the easy to install alternative to steel. It underlines the superb performance of PA-U12 pipes for alternative installation techniques without need for a separate mechanical protection. An unplasticized polyamide 12...
Author(s) : Jörg Wermelinger, Sunwoong Choi
In the development of an international standard on non-destructive test for polyethylene electrofusion socket (EF) joints, the inspection capability of the phased array ultrasonic test (PAUT) in assessing flaws in the joints was needed to establish procedure qualification of the test method. For this, a worldwide...
Author(s) : Thomas R. Kratochvilla, Raimund Eremiasch, Christoph Bruckner
In the last years effort has been made to develop and standardise new accelerated test methods to evaluate PE 100-RC materials in short times in form of test bars. The two most important developments, the cracked round bar test (CRB test) and the strain hardening test (SH test) were published as final ISO standards in...
Author(s) : Wang Zhanjie
As the largest production country, with numerous applications, China’s plastic pipe industry is developing steadily to meet the demand and needs. This paper analyzes the current situation and barriers, and proposes the breakthroughs to achieve a sustainable, stable and healthy development of China’s plastic pipe...
Author(s) : Liang Yu, Akshay Ponda, Dane Chang
Following the development of US shale oil and gas production since 2007, the demand for thermoplastic pipes with better corrosion resistance, and lower installation and operation cost than carbon steel pipe, has been growing significantly. Nylon 12 has been qualified for hydrocarbon transportation in offshore flexible...
Author(s) : Mario Messiha, Andreas Frank, Isabelle J. Berger, Jan Heimink, Hermann van Laak, Florian Arbeiter, Gerald Pinter
Since the last decade polyamide 12 (PA12) has been successfully introduced as material for SDR 11 gas piping systems up to 18 bar, representing itself as an attractive alternative to steel pipes for high-pressure applications. Practical experience has confirmed that beside the higher strength, PA12 pipe grades also...
Members of the Association
