Installation
Plastic Pipes Conference Association # 2006 Washington DC
MacKellar, Lowe, Ingham, Ashdown
Polyethylene (PE) is the preferred material for 90% of all water mains laid in the UK. The pace of renovation of dilapidated cast iron water networks has led to the increasing demand for coils of flexible PE pipe, driven by the efficiency of using less joints and taking up considerably less space in the congested urban street environment. However, there are drawbacks with coiled PE pipe, including significant ovality and axial curvature, which cause many difficulties when trying to join coiled pipe ends in the trench. This is particularly true for the larger diameter, thicker wall, coiled pipes, notably PE100, 180mm SDR11. The ability of a tilted orifice plate to remove axial curvature and re-round pipe has been known since the mid 1990’s, however lack of commercially available equipment and too many unanswered questions have killed development. Bodycote PDL, with the support of the UK Water Industry, have re-examined the technical difficulties and believe these have been resolved sufficiently to enable a cost effective, easy to use device to be produced. The coiled pipe straightener is now providing the required solution.
Related papers
Author(s) : Patrick Campbell, Joanne Claronino, Shana Meeus, Joseph Sanders, David Chrystie-Lowe
Polyethylene (PE) potable water mains, with design life of 50 years (BS EN 12201), have been in widespread use in the UK water industry for more than 30 years. PE pipe is light, flexible and reliable in comparison with other pipe materials and the UK water industry has made a considerable investment in replacing...
Author(s) : Ian Aldridge, Declan Robinson, Dave Smart, Chris Reed, Martyn, Greig, Trevor Stafford, David Christie-Lowe, Alec Erskine
For the UK polyethylene (PE) gas pipe network, the first installations now exceed 40 years in the ground, with an original design life of 50 years. It was thus timely to review the current condition and performance history of these first generation PE materials. A major 4 year project was started in 2010 to examine...
Author(s) : David Chrystie-Lowe
The many benefits of PE100 pipe materials include flexibility and toughness in addition to being relatively light products that are not subject to corrosion and expected to last well beyond the design lifetime [1]. It is also a distinct advantage that end-load resistant joints can be made using butt fusion (BF) and...
Author(s) : Edward Ingham, Mike Shepherd
Exova has previously demonstrated that under normal operating conditions PE 100 pipes would be expected to have a lifetime of over 200 years, but in the UK concerns have been reported about relatively high failure rates within the water utilities of fusion joints, particularly for large diameter pipes. For some time,...
Author(s) : Sonya Pemberton, David Chrystie-Lowe, Sabah Rafiq, Karolina Modelska, Edward Ingham
A room temperature tensile test using thin films taken from the outside and inside surface of polymer pipes has been developed to study the slow crack growth resistance of ageing PE pipelines via analysis of their strain hardening behaviour. A range of PE materials in service since the early 1970s and 80s are studied,...
Author(s) : Ken Murphy, David Lowe
Exova is continuing in the long tradition of Pipeline Developments Limited (PDL) in the UK with research, development, testing, quality assurance (QA) and failure analysis of modern plastic pipe materials and joints. Along with this ongoing work Exova has assessed various non destructive testing (NDT) techniques in an...
Author(s) : Lowe, Starkey, Powell
With the increasing success of PE100 and usage of pipes of increasingly large diameter, concerns have been raised about the quality of weld performance with relatively thick walled pipes (>50mm), which has led to the current investigation. In addition to the consideration of welding conditions adopted in the UK,...
Author(s) : MacKellar
In 2002 UK Water Industry Research Ltd commissioned Bodycote PDL to collate and maintain a database of all water main failures in the UK and develop a protocol for data collection of failure information. Despite the huge disparity in the data formats from each company this has been achieved and maintenance of the...
Author(s) : MacKellar, Headford, Ingham
This paper provides an overview of the basic properties of plastic pipes, in the range 50mm to 400mm, and how these should be used in the design of above ground process pipe systems made of PE and PVC. It covers the basic properties of plastics, examples of the determination of load cases and describes the basic types...
Author(s) : Marshall, Ingham, Brogden
When clients purchase plastics pressure pipes, they have frequently made that decision because they know that plastics do not corrode and they assume that if they do not exceed the pressure rating then a long lifetime should be assured. (Low cost has also been known to be a factor). It is thus of concern for the...
Author(s) : Lowe, Marshall
A Rotating Pipe Drum Test has been developed to assess the abrasion performance of plastics pipes to an extpnt where most test variables are understood. The procedure involves the rotation of relatively short pipe lcngths containing slurry on a conventional bail mlll. In the rest, the pipe surface repeatedly passes...
Author(s) : Lowe, Marshall
A new test has been developed to evaluate the abrasion performance of different pipe materials. The Rotating Pipe Test simulates sliding bed flow of a slurry and gives quite excellent data reproducibility. The influence of sample geometry and slurry changing frequency and particle size have been assessed. The effects...
Author(s) : Lowe, Ingham, Starkey
Members of the Association
