Papers
Plastic Pipes Conference Association # 2014 Chicago
S H Beech, P Belloir, C Salles
Plastics piping systems are specified against a relevant standard, giving dimensions, essential performance requirements, the design basis for pressure rating, and testing to prove fitness for purpose, giving the end user the confidence to use these systems. The plastics pipes industry has successfully developed standards to ensure durability and high reliability, thanks to a strong commitment from the whole value chain from raw material suppliers, product manufacturers, test laboratories, and not least from end users. In turn standards have created the incentive for suppliers to improve material performance, and manufacturers to develop more innovative products.
Plastics piping systems are one of the most critical applications using plastics materials alongside medical and aerospace applications. Systems are normally designed on a 50 year design basis, but nowadays with expected lifetimes in excess of 100 years. Plastics systems are used for a wide range of applications including gas supply, with potentially serious consequences in the event of leakage. The plastics pipes industry has strongly promoted and supported standardisation which has been a major contribution to its success to ensure reliable and durable systems that solve the corrosion issues of metallic systems. So what are standards and why do we need them?
Related papers
Author(s) : A. Taraiya, P. Degenhart, M. Soliman, M. Boerakker, R. Handstanger, R. Kleppinger
Since the introduction of polyolefins for pressure pipes, continuous improvements have been made to meet ever-higher demands on their performance and to expand their application window beyond their original scope, mostly based on new resin formulations. Today, we also continue to push the limit to provide better...
Author(s) : Donald Swen, Leanne Pichay, Nicholas Vallin, Alice Wu, Jim Johnston
In the rural commune of Ait Bayoud, Morocco, two of the most remote villages in the area, Ilguiloda and Izgouaren, live with water scarcity. To meet their water needs, women and children walk several kilometers to the nearest spring each day, often multiple times a day. Consequently, children cannot attend school...
Author(s) : Andreas Moerman, Flip van der Valk, Mirjam Blokker KWR, Tjakko Haaijer, Jan Vreeburg,
Drinking water companies with ageing networks are facing vast amounts of drinking water network reconstructions during the coming decades. This development coincides with the energy transition, which puts pressure on the available space underground. These external drivers give drinking water companies an opportunity...
Author(s) : Anja Armani, Helmut Zanzinger
PE-pipes are used in applications at temperatures higher than 40°C and long service lives like drainage pipes in landfill basal lining systems, drainage pipes in tunnels with high cover heights, geothermal applications, power plant technology, mining, underground cable protection pipes for power lines for...
Author(s) : Dominique GUEUGNAUT, Pascal AUSSANT, Romuald BOUAFFRE, Myriam BECHROURI
Concerns regarding the environment and sustainable development have revived interest in the reprocessing and re-use of polymer materials from manufactured objects that have reached the end of their operating life. Within this framework, formal professional agreements have been put in place at global level under the...
Author(s) : Paul J. Freudenthaler, Joerg Fischer, Mathias Eder, Reinhold W. Lang
For controlled water disinfection, typically chlorine is used and preliminary studies demonstrate its aging and crack growth acceleration effects on polyolefin pipe materials [1, 2]. Although the use of recycled plastics is not prohibited in some ISO standards for polyolefin piping systems [3–5], only small amounts...
Author(s) : Shuhei Nishida, Shintaro Iwasaki, Hidefumi Yamanaka, Takahiro Kasatani
Polyethylene pipelines have been used for natural gas service applications for over 40 years in Japan. It is thought that they will continue to be used widely for many years. Therefore, it is important to confirm the conditions of the existing pipelines being used for the long term. In this study, polyethylene pipes...
Author(s) : James F. Mason, Akshay Ponda, Hermann van Laak, Buc Slay
The effects of liquid hydrocarbons on long term strength of pipe grade thermoplastic resins is an important consideration when designing pressure pipe for use in the oil and gas industry. There is an extensive body of work going back several decades descri bing these effects for pipe grade polyethylenes, and all...
Author(s) : Ernst van der Stok
For PE 100-RC, two tests are still under development for pipes: the point load test (PLT) and the accelerated notch pipe test (aNPT). The PLT was developed by a project group consisting of manufacturers and end users. The PLT determines the resistance to point loads as they can occur in practice. An earlier study...
Author(s) : S. Nestelberger, J. Cheng
The Point Load Test (PLT) [ 1, 2] was designed to simulate the SCG (slow crack growth) failure initiated by a rock pressing into the exterior wall of a polymer pipe. Today’s PE materials sustain long PLT testing times, due to its high SCG resistance design. Consequently, an accelerated “PLT+” with the support of...
Author(s) : Greg Scoby, PE
This paper will detail the steps taken during adoption of HDPE for potable water systems improvements including material justification, creation of related specifications, investigation of available piping components, qualification of contractors and the construction/inspection of related systems. The City of...
Author(s) : Christian Schalich
Plastic pipes for infrastructure and building applications are precisely specified with regards to wall thickness and diameter. Pipe manufacturers use different measuring methods in order to ensure the required dimensional accuracy and maintain a constant high quality. This paper introduces a measuring system based on...
Author(s) : Mario Messiha, Britta Gerets, Jan Heimink, Andreas Frank, Florian Arbeiter, Gerald Pinter
A majority of field failure of viscoelastic plastic pipes can be attributed to slow crack growth (SCG) and has become crucial in terms of characterization of newly developed materials – particularly, if they are designed for pressurized pipe applications. In this study, investigations in terms of SCG resistances...
Author(s) : Eng. Grigorios Vigellis, Eng. Mohamed Hageb
Continuous development and innovation in the production of plastic pipes made by high density polyethylene (HDPE) has enabled the industry to produce much larger diameter systems than ever believed possible. The enablers for production of such large plastic pipes are three main pillars: continuous innovation...
Author(s) : Jennifer Ravereau, Jose Teixeira Pinto, Malena Bernabeu, Jose Alacid, Jean-Philippe Le Goff, Frederic Mohier, Benjamin Rabaud
Drinking water network fittings such as valves are made of brass materials known to be robust over long periods. Due to the gradual inflation metallic raw material costs, composite plastic valves have grown in market share. Uncertainties remain, however, on their long-term reliability. The aim of this work is to...
Author(s) : White G. Jee, Wes Long, Marcello Russo
In 2018, the North American HDPE pressure pipe market experienced unprecedented demand and growth especially in the region of the Permian basin in west Texas. 1 As aninnovative means of increasing HDPE pipe supply in this region, the first modular mobile extrusion plant was moved to Pecos, TX. Using custom designed...
Author(s) : C. Losher and P.V. Mercea
In the framework of the German Environmental Agency (UBA) requirements of plastic articles in contact with drinking water (KTW-BWGL-guideline), the compliance is verified by comparing so-called “expected concentrations at tap”, C tap , of substances contained in the plastics with specific limits in drinking water...
Author(s) : Thomas R. Kratochvilla, Patrick Grünbeck, Christoph Bruckner, Raimund Eremiasch, Harald Wilhelm, Mario Vukelja
In the last decades pipe dimensions of extruded PE pipes have reached new orders of size. Today, PE pipes with outer diameters of up to DN/OD 3500 mm are produced and used for pressure pipe applications like seawater intake/discharge, outfall, sewage and industrial process piping systems. To test the long-term...
Author(s) : Lukas Travnicek, Pavel Hutar, Jan Poduska, Andreas Frank, Florian Arbeiter, Jaroslav Kucera, Jiri Sadilek, Gerald Pinter, Lubos Nahlik
The application of recycled material in pressure piping systems has been considered lately – it was suggested, that the recycled polyethylene could be used as a part of a multilayer pipe together with virgin material. This type of pressure pipes is not availableon the market yet, so their properties can be only...
Author(s) : Horst Stimmelmayr, Peter Sejersen
The voluntary certification scheme for plastic multilayer piping systems for hot and cold drinking water inside buildings is a joint effort of two key European organizations. It was initiated in close cooperation with the Brussels based European trade association of plastic pipe and fittings manufacturers, TEPPFA....
Members of the Association
